Delabie Wall-mounted Electronic Soap Dispenser
The Delabie Wall-mounted electronic soap dispenser is suitable for installation in modern spaces like museums, restaurants, company headquarters, airports. Liquid soap or hydroalcoholic gel dispenser with 1 litre capacity. Vandal-resistant with lock and standard Delabie key. Hands are automatically detected by infrared cell for non-touch operation. One-piece hinged cover for easy maintenance and better hygiene. Made from Type 304 Stainless steel with a Matte black bacteriostatic coating.
Delabie Highflow Hand Dryer - Matte Black
The Delabie highflow hand dryer is a high speed dryer suitable for installation in commercial buildings requiring a high quality finish and a fast means of hand drying. Illuminated central nozzle focuses the pulsed air on to hands at over 230km/h, drying hands in 10-12 seconds. It has automatic sensor activation with a choice of warm or cold air via a concealed switch. Made from Type 304 Stainless steel with a Matte black bacteriostatic coating.
Access Panels for Zurn Flushing Valves
ZA access panels are designed to give access to recess mounted ZURN single flush, flushing valves. Panel fabricated in 1.6mm Type 304 stainless steel with a No 4 brushed finish. Standard size 345 x 345, but also available as -SP 345 x 450 where greater access to valve is required.
MacDonald Security Access Panels
MS-AP heavy duty access panels are designed to give general access to inwall mounted valves plus, more specifically, recess mounted ZURN single flush, flushing valves where a heavier duty panel is preferred over the standard ZA access panel.
Panel fabricated in 2.0mm Type 304 stainless steel with a No 4 brushed finish and radiused edge. Standard size 345 x 345 but also available as -SP 345 x 450 where greater access is required.
MacDonald Security Access Panels
MS-AP heavy duty access panels are designed to give general access to inwall mounted valves plus, more specifically, recess mounted ZURN single flush, flushing valves where a heavier duty panel is preferred over the standard ZA access panel.
Panel fabricated in 2.0mm Type 304 stainless steel with a No 4 brushed finish and radiused edge,
Standard size 345 x 345 but also available as -SP 345 x 450 where greater access is required.
Delabie Black Binoptic Mix Electronic Mixer
Delabie DE379MCHB is a through-wall mounted matte black electronic basin mixer with independent IP65 electronic control unit and shock-proof infrared presence detection sensor at the end of the spout. Available as 230/12V mains supply with transformer. Adjustable anti-bacterial duty flush operates for ~60 seconds every 24 hours after last use. Side temperature control with adjustable maximum temperature limiter. Flow rate is pre-set at 3L/min at 300kPa, can be adjusted from 1.4 to 6L/min. Operating pressure is 100-500kPa, 300kPa is recommended.
Delabie Black Binoptic Mix Electronic Mixer
Delabie DE378MCHB is a deck mounted matte black electronic basin mixer with independent IP65 electronic control unit and shock-proof infrared presence detection sensor at the end of the spout. Available as 230/12V mains supply with transformer or 6V Lithium battery power. Anti-bacterial duty flush operates for ~60 seconds every 24 hours after last use. Side temperature control with adjustable maximum temperature limiter. Flow rate is pre-set at 3L/min at 300kPa, can be adjusted from 1.4 to 6L/min. Operating pressure is 100-500kPa, 300kPa is recommended.
Delabie Tempomatic 4 Electronic Basin Tap
Delabie Tempomatic 4 wall-mounted electronic basin tap, battery-operated with integrated 123 6V Lithium batteries. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 seconds every 24 hours after last use). Active infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated stainless steel body L. 130mm. Cap fixed in place by 2 concealed screws. Anti-blocking security. Stopcock supplied.
DVS Thermostatic Mixing Valve 4 IN 1
DV-TMV20 is a high quality thermostatic mixing valve, approved for use in basins, showers, bidets and highpressure bath fill applications (above 1 bar), under the UK NHS TMV3 approval scheme which guarantees a drip tight closing of HW supply should there be CW failure. This makes it ideal for critical healthcare applications.
The valve is designed to control the mixed water outlet temperature to within +/- 2°C regardless of fluctuations in the temperature and pressure of the hot and cold water supplies.
ASI Stainless Steel Inter-Lok Framed Mirror
The ASI 0600 series mirror has a stainless steel inter-lok angle frame with either standard plate glass or tempered glass options. The 19x16mm frame is roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. The frame is formed seamless with mitred corners, welded, polished and have gently radiused edges to provide added strength and an appealing aesthetic. Mirror edges are protected with friction and chafe absorbing fillers.