KWC DVS High Security Basin
KWC DVS DV-VR01-081 is a high security washbasin designed and tested to be vandal-proof and avoid ligature points wherever possible. This model a no tap hole variant and is suited to combine with a MacDonald Security washbasin control set available in electronic or mechanical.
Watts Eurotherm Thermostatic Mixing Valve
Watts Eurotherm TRL117 is a thermostatic mixing valve designed to supply sinks and washbasins with tempered water not exceeding the set temperature (up to 5 washbasins depending on tap flow rate). This mixer is ideal for schools, restaurants, laboratories,, offices, correctional, etc...anywhere needing a supply of water at a pre-set temperature on site. Hot water supply cut totally and immediately is cold water supply is interupted.
PROTECTION AGAINST LEGIONELLA
MacDonald Bariatric Folding Shower Seat
The MacDonald bariatric folding shower seat is made for bariatric patients and comes with Satin Stainless Steel mounting and legs. The white acrylic seat features white-slotted, slip resistant decking with rounded edges. This bariatric shower seat will take a static load rating of 350kg, as opposed to the standard shower seat. When not in use this shower seat will fold up against the wall.
Dimensions: 960 x 400 x 475 mm (L x W x H)
Note that this does not comply with the NZS4121 for accessible bathrooms due to the size requirements of 800x450mm.
Solo Electronic Dual Flush Valve
MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.
Franke Stratos Paper Towel Dispenser
Franke Stratos Paper Towel Dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
1x AVAILABLE
Franke Stratos Paper Towel Dispenser
Paper towel dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
ASI Disposa-Valve Soap Dispenser
The ASI5001-SS is a surface mounted soap dispenser for use with disposable cartridge fabricated of alloy 18-8 stainless steel, type 304. The dispenser housing and wall bracket is 16 gauge and dispenser door is 22 gauge, attached to unit at the bottom with a full length 3/16′′ (5mm) dia. stainless steel multi-staked piano hinge and held closed with a tumbler lock keyed alike to other ASI washroom equipment. All exposed surfaces are satin finish and be protected during shipment with PVC film that shall be easily removable after installation.
Delabie Wall Mounted Elbow Connection
The Delabie DE868121 is a 15mm chrome plated brass elbow connection used to fit into a wingback and then connect a 15mm shower hose.
ASI Stainless Steel Shelf with Raised Edges
The ASI 0690 is a stainless steel shelf formed from one piece of 18 gauge stainless steel, satin finish. Available in two lengths (457mm and 610mm) and has a depth of 156mm.
Zurn Inline Vacuum Breaker
The Zurn Z7000-VB inline vacuum breaker is designed for use in the shower where a shower hose is fitted to prevent the backflow of water. Inlet and outlet are 1/2". The female connection attaches to the water supply fixed wall elbow and the shower hose connects to the male outlet. Arrow on vacuum breaker should point in the direction of the water flow. The body is manufactured in brass with hard chrome finish.