Zurn T-shaped Thermostatic Mixing Valve
Product Code: 
W191070
Product Enquiry

Enquire about this product below

To prevent automated spam submissions leave this field empty.
To prevent automated spam submissions leave this field empty.

Tabs

Overview

The Z191070 Zurn Aqua-Gard® Thermostatic Mixing Valve is designed to be installed at the point of use to assist in the prevention of scalding. The valve's extremely rapid response rate make it most suitable for installation at plumbing fixtures and appliances for the final control of water temperature. 

The Z191070 is Australian Watermark AS4032.1 listed for fixtures, sinks, lavatories or bathtubs. The ZW1070AUS will mix hot and cold water from the distribution system to a final safer temperature of 35 - 46°C.

Working pressure 10kPa - 500kPa
Maximum pressure differential 103kPa between hot and cold water inlets (Equal pressure preferred)
Flow Rate @ 310 kPa pressure loss 0.63 l/s
Minimum flow rate 0.02 l/s
Maximum inlet temperature 90ºC

1x AVAILABLE 

For more information please contact:
Ashleigh Brunner
+64 9 624 1115
sales@macdonaldindustries.co.nz