ASI Frameless Stainless Steel Mirror
AS8026 mirrors are fabricated from 1mm Type 304 stainless steel with a #8 mirror finish. The mirror has a 6mm thick Masonite waterproof tempered back board for strength and the stainless steel mirror is returned 8mm all around the backing board. The mirror has 4 x 5.5mm mounting holes ( 6 x holes on 610 x 910 size).
NOTE: The 8026 does not have the same reflective quality as glazed versions such as Model 20650 and some limited distortion is likely in very large sizes.
ASI Roval Glass Mirror
Roval mirror frames are fabricated from 1.2mm Type 304 stainless steel and are brush finished. The frame is formed seamless with mitred corners, welded, polished and have gently radiused edges to provide added strength and an appealing aesthetic. Mirror edges are protected with friction and chafe absorbing fillers.
MacDonald Stainless Steel Automatic Hot Hand Dryer
The Eco Dry 2000ST hand drier is a fully automatic sensor activated drier suitable for installation in any commercial application.
With a low noise output and high delivery fan, Eco Dry 2000ST will dry hands in approximately 30 seconds. It has a robust brush finish stainless steel cover which will withstand normal rigours of a commercial washroom.
Franke Rodan Hot Air Hand Dryer
The timeless design of Franke Rodan hand dryer with its angular side profiles lends itself to the contemporary decor of heavily frequented washrooms. Whether you wish to complete a washroom by using this alongside the Rodan range of accessories or as a stand-alone hand dryer, this is an ideal unit to use for effective hand drying at a competitive cost.
JDM Applause Hot Air Hand Dryer
The Applause hot air hand drier is a high quality fully automatic drier, suitable for commercial applications requiring fast drying times with low noise levels and minimal visual impact in the bathroom. Available in either satin finish stainless steel or powder coated white, the Applause is an attractive option for any commercial bathroom.
JDM Autobeam Hot Air Hand Dryer
The MacDonald Autobeam hot air hand dryer is a high quality robust fully automatic dryer, suitable for commercial applications requiring fast drying times where strength and durability are important.
It has a cast aluminium case for strength and high air flow ensure minimum drying times.
ASI Surface Mounted Double Toilet Roll Dispenser with Hood
AS74022-HSSM is a double roll toilet paper dispenser for standard core roll toilet paper with hood and dispense all standard core roll toilet paper up to 150mm diameter. Fabricated of stainless steel type 304, all exposed surfaces are finished in either satin or bright finish. Standard roll holders are made from high impact ABS plastic finished with chrome plating. Hoods are attached with a full-length brass pivot rods.
Franke Rodan Surface Mounted Paper Towel Dispenser
RODAN FR-RODX600 wall mounted paper towel dispenser holds up to 500 multi-fold paper towels. Door and waste bin are 0.8mm Type 304 stainless steel with satin finish. All exposed surfaces are protected with PVC film, to be removed after installation.
Dispenser door is attached to the cabinet with a heavy duty stainless steel multi staked piano hinge and is held closed with a Franke keyed alike tumbler lock. Cabinet is slotted on the sides to allow for ease of viewing towel capacity.
Structural assembly of body is of welded construction.
ASI Petite Surface Mounted Paper Towel Dispenser
AS0215 surface mounted paper towel dispenser shall hold up to 200 C-fold or 275 multi-fold paper towels and is fabricated in 1mm Type 304 satin stainless steel. All exposed surfaces are protected with PVC film, to be removed after installation.
Dispenser door is attached to the bottom of the unit with a heavy duty stainless steel multi staked piano hinge and will be held closed with a recessed tumbler lock keyed alike to all other ASI products.
Wall below unit is protected against accidental door drop by self limiting body and hinge construction.
ASI Surface Mounted Paper Towel Dispenser
AS0210 surface mounted paper towel dispenser shall hold up to 525 multi-fold paper towels and is fabricated in 1mm Type 304 satin stainless steel. All exposed surfaces are protected with PVC film, to be removed after installation.
Dispenser door is attached to the bottom of the unit with a heavy duty stainless steel multi staked piano hinge and will be held closed with a recessed tumbler lock keyed alike to all other ASI products.
Wall below unit is protected against accidental door drop by self limiting body and hinge construction.