ASI Roval Semi-Recessed Mounted Double Toilet Roll Dispenser
Roval AS20031 is a semi-recessed mounted twin roll, toilet paper dispenser. The dispenser has a formed seamless, bowed front face with gently radiused edges to provide added strength and complimentary appearance. Fabricated in 0.9mm type 304 satin finish stainless steel. All exposed surfaces are protected with PVC film which is easily removed after installation. Includes semi-recessed flange for unit.
Franke EXOS Stainless Steel Jumbo Toilet Roll Holder
Franke EXOS Jumbo toilet roll holder for wall mounting, chromium nickel steel, with satin-finish and InoxPlus surface refinement for the reduction of finger marks making it easier to clean. Material thickness 1.2 mm, closed casing with inspection windows on the side, paper dispensed over two serrated tear-off edges, cylinder lock with Franke standard key, for one jumbo roll with a maximum diameter of 280 mm and a tube measuring 40 mm, includes mounting materials.
Dimensions 325 x 364 x 130 mm (W x H x D)
Solo Electronic Dual Flush Valve
MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.
Franke Stratos Paper Towel Dispenser
Franke Stratos Paper Towel Dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
1x AVAILABLE
Franke Stratos Paper Towel Dispenser
Paper towel dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
Delabie Swivel Swan Neck Spout
DELABIE DE967152 is a swivel spout L.150mm H.120mm with M1/2” connection andfixed by backing-nut. Chrome plated solid brass with scale resistant flow straightener pre-set at 3L/min.
ASI Disposa-Valve Soap Dispenser
The ASI5001-SS is a surface mounted soap dispenser for use with disposable cartridge fabricated of alloy 18-8 stainless steel, type 304. The dispenser housing and wall bracket is 16 gauge and dispenser door is 22 gauge, attached to unit at the bottom with a full length 3/16′′ (5mm) dia. stainless steel multi-staked piano hinge and held closed with a tumbler lock keyed alike to other ASI washroom equipment. All exposed surfaces are satin finish and be protected during shipment with PVC film that shall be easily removable after installation.
Delabie Wall Mounted Elbow Connection
The Delabie DE868121 is a 15mm chrome plated brass elbow connection used to fit into a wingback and then connect a 15mm shower hose.
Rubbish, Recycling and Linen Chute
Soiled Linen Chutes
Linen chute allows efficient and economical collection of soiled linen from upper floors in multi-storied hotels, hospital and apartments to a centrally located discharge area on a lower floor.
Rubbish Chutes
Rubbish chutes provides an efficient and hygienic method of waste removal in all types of multi-storied residential and commercial buildings. Rubbish chutes are the best way to consolidate waste and recyclables from around the building into a single location for easier collection.
ASI Stainless Steel Utility Hooks
The ASI 1307 is a surface mounted utility hook fabricated of type 304 stainless steel with satin finish and is 102 mm high with edges returning 13 mm to the wall. Available in different lengths with multiple hooks, see models.
