Zurn Recessed Single Flush Valve
Zurn ZH6152 is a concealed mounted toilet pan flush valve designed to be installed in a plumbing duct with a remote hydraulic push button mounted on the wall directly above the toilet pan. Depending on the model of valve chosen, it may be installed connected to mains pressure water supply or from a non potable supply tank.
Pressing the button delivers a metered 6L flush (adjustable) irrespective of pressure variations.
Zurn Dual Flush Valve
Zurn ZDF6152-XL is a recess mounted toilet flush valve designed to be connected to mains pressure water supply. It is also available as a non potable valve where water is supplied from a dedicated supply tank or from a pressurized recycled water feed. The 2 button plate allows the user the option of flushing 3 or 6L. Flush volumes are consistent irrespective of pressure variations. The product is specified in 2 parts: the inwall valve is common to all versions - ref ZDF6152XL (L). The customer must then chose the type of face plate based on the Tech Data sheet (see Downloads)
Wisa XS Delos Push Panel Dual Flush
Wisa push panels are available as dual flush and come in several finishes. In line with the latest trends and developments special control panels have been designed for toilet systems. These Dualflush panels with a water-saving button are made of high-quality plastic, stainless steel or tempered glass and are available in various designs and colours. There is a wide choice of contemporary flush plates.
Wisa XS Mont Inwall Cistern
The Wisa Mont XS Inwall Cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing. The cistern can use either the mechanical XS push panels or pneumatic push panels. The cistern has the following features;
Wisa XS Framed Inwall Cistern
The Wisa XS Framed Inwall Cistern is a pre-assembled cistern with structural support frame for use with all wall hung toilet pans. The Wisa XS inwall cistern is ideal for use where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing. The cistern can use either the mechanical or pneumatic push panels. The cistern has the following features;
WISA 300VP High Security Inwall Cistern
The Wisa WS300VP high security inwall cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing.
The cistern is supplied with a robust stainless steel push button assembly which is screw fixed to the wall, a pneumatic actuator and pneumatic tubing allowing flexibility of button mounting point.
The inwall cistern is supplied as standard in a 6L capacity and is only available as a single full flush. Full duct access must be available to the WS300VP for servicing purposes.
Zurn Sensor Flush Valve
Zurn Model ZEM-6152XL flush valve is a sensor activated WC flushing valve with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has achieved the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.
Zurn Mop And Broom Holder Rack
Zurn Z-MH mop and broom holder rack is fabricated of one-piece hi-hat channel Type 304 stainless steel, 20 gauge, with satin finish. Each mop holder is on a pivoting spring loaded serrated rubber that can hold the round handles of 22-32mm diameter wedged against the ribbed clamp plate. The Z-MH comes in three different lengths; 660mm for 3 mops; 914mm for 4 mops; and 1168mm for 5 mops.
Zurn Sink Faucet For Cleaners Sink
Zurn Z-SF is a purpose made commercial grade wall mounted faucet suitable for use above cleaners sinks.
It is polished chrome plated cast brass with 1/4 turn ceramic disc cartridges, with eccentric swivel inlets allowing adjustable centres from 184mm to 222mm. Inlets include integral isolators allowing inline servicing. Valve spout includes chemical resistant vacuum breaker for backflow protection and 3/4" hose connection allowing use of Zurn Z-HH short hose. Valve has adjustable wall brace and bucket hook allowing buckets to be hung off faucets while filling.
Zurn Floor Mounted Mop Sink
Zurn 1996 cleaners sinks are floor mounted, molded from a high density composite and are supplied with optional wall and edge protection. Also available are engineered commercial grade faucets with wall support struts enabling buckets to be hung off the faucet at an easily reached height. Faucets are supplied with integral backflow protection allowing the connection of optional short hose.
NOTE: This is a moulded product for commercial use only.
