ASI Surface Mounted Horizontal Liquid Soap Dispenser
Model AS0345 is a horizontal mounted, Type 304 stainless steel with satin finish, 1.18L capacity liquid soap dispenser. Valve is constructed of a plastic valve body and push button with stainless steel and plastic internal parts. A tamper resistant sight gauge is provided. Unit has a hinged stainless steel refill door on top of unit, which is opened with special key provided.
Optional foam soap dispenser also available refer model AS0357.
ASI Surface Mounted Vertical Soap Dispenser
ASI AS0347 is a vertically mounted, has a 1.2 L capacity for liquid soap, 304 stainless steel with satin finish, comes with an all purpose valve, and a tamper-resistant refill indicator.
Push button to dispense soap. Unit is refilled through hinged door at top requiring special key (supplied) to open. Soap tank will continue to feed properly until soap level is below valve intake port. Tank supply is replenished manually.
Soap Requirements:
ASI Roval Bench Mounted Automatic Soap Dispenser
The Roval Model 20333 automatic deck mounted soap dispenser holds 1.6L of liquid soap and dispenses in cycles of single shot volume of approximately 1.25ml. Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry powered by four (4) D size 1.5 V batteries (supplied by others) in a screw-locked compartment located under counter. Unit has type 304 stainless steel alloy with a polished finish over all exposed surfaces.
Franke Rodan Surface Mounted Vertical Liquid Soap Dispenser
RODAN FR-RODX618 wall mounted soap dispenser is fabricated in 0.8mm satin finish stainless steel with an impact resistant plastic pull paddle/dispenser. A 0.8L capacity soap tank is accessable using the Franke keyed alike cylinder lock.
Franke Rodan Surface Mounted Horizontal Liquid Soap Dispenser
RODAN FR-RODX619 wall mounted soap dispenser is fabricated in 0.8mm stainless steel with satin finish. It has an impact resistant plastic front mounted push button and a 1L soap tank, which is accessible using the Franke keyed alike cylinder lock.
MacDonald Stainless Steel Liner Dispenser
The BR200-SSLD liner dispenser is made from 16 gauge, 304 brushed stainless steel and is for mounting separately from a changing table. Recessed mounting means the front protrudes just 6mm into the room. The liner dispenser holds 100 liners and is key locked to prevent tampering or theft.
Delabie Through Wall Timed Flow Dual Basin Control Valve
DELABIE MS-747-2.. is a dual valve vandal resistant through wall water control designed to be installed through wall where there is an accessible duct directly behind the basin. The valve set is supplied with a 80 x 150mm dia. escutcheon plate.
Pressing a valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a pair of coloured indicators allowing it to be used for both CW and MW.
Also available with an extended round headed button to suit use in disabled bathrooms.
Delabie Through Wall Timed Flow Basin Control Valve
A vandal resistant through wall water control which is designed to be installed where there is an accessible duct directly behind the basin.
• The valve set is supplied with a 75mm dia.escutcheon plate.
• Pressing the valve button initiates immediate water flow.
• On release of button water will stop flowing within 3 seconds.
Also available with an extended round headed button to suit accessible bathroom.
Delabie Neck Tube For Top Inlet Urinal
The Delabie 752000 neck tube is designed to fit between one of the surface mounted urinal valves and the top inlet of a RAK Phoenix or similar urinal.
Neck tube F1/2" Ø35 for common or siphon action urinals:
• DE778800
• DE777800
• DE777000
Delabie Temposoft 2 Time Flow Urinal Valve - Angled Inlet
DELABIE DE778800 is a surface mounted time flow urinal valve with a soft touch operation. Soft touch operation allows users to press the control with no effort especially children, elderly or people with reduced physical ability. Time flow is ~3 seconds. Flow rate is pre-set at 0.15L/second at 300kPa, can be adjusted. Operating pressure is 100-500kPa, 300kPa is recommended. Chrome plated solid brass body with angled inlet for concealed inlet M1/2” connection for water supply.
Suitable for use on all our top inlet wall hung urinals.


