Franke Stainless Steel Pod Urinal
High quality satin finish Type 304 stainless steel urinal, complete with 40mm waste.
FR-CMPX538 is a surface mounted back inlet urinal, suitable for connection to mains pressure flushing valves such as Delabie 779 128, 779 427, and 778 800 recess mounted valves. When installed, the urinals can acheive a WELS rating of 3 Stars. Alternatively, where up to 4 urinals are installed on a common wall, a Zurn Z6190WG flushing valve complete with Water Guard sensor could be used for similtaneous flush and flushing regulation on
user detection.
KWC Franke Stainless Steel Toilet Suite
The KWC Franke FRFM4-300VP is a standard height stainless steel back to wall/ floor mounted toilet suite. It is suitable when vandal resistant products are required.
The cistern tank provided is WISA 300VP, which is surface mounted, behind a robust stainless steel cover.The pneumatic actuator is fitted on this. This is only available in a single 6L flush version.
KWC Franke Stainless Steel Floor Mounted P or S Trap Toilet Pan
KWC FRANKE FRFM4 is a floor mounted stainless steel P trap toilet pan with side access panels. It is fully shrouded with anti-ligature flushing rim with sufficient room inside the shroud to enable it to be converted to an S Trap if preferred.
The top fascia plate is convexed to prevent pooling of liquid. Seat or seat pads can be supplied but can only be fitted at time of ordering.
For flushing options, please refer to the Zurn flush valves, Warden control system or Wisa inwall cistern.
Warning: Do not use dimensions for set out purposes.
KWC Heavy Duty Stainless Steel Wall Mounted Toilet Pan
KWC HEAVY-DUTY Wall hung WC pan, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, type 304 stainless steel, surface satin finished, material thickness 1,5 mm, flushing certificated to EN 997, concealed flushing rim with min. 4 liter flushing capacity, with a shrouded 100 mm diameter horizontal 'P' trap outlet, pressed seat area tapered towards centre, all edges curved, fixing with 280 mm stainless steel rods and screw nuts (included) through the wall. 4 litre flush EN 997 approved.
Dimensions 360 x 351 x 500 mm (W x H x D)
KWC Heavy Duty Stainless Steel Floor Mounted Toilet Pan
KWC Heavy-Duty floor standing WC pan for fitting through duct wall, manufactured from type 304 stainless steel, material thickness 1,5 mm for the pan and shroud - satin polish finish. The WC incorporates a stainless steel P trap 102 mm o/d. A separate mounting plate and 4 bolts are provided for mounting the WC through a duct wall. The Campus WC has a pressed seating area that does not require a separate seat in vandal prone installations. However, a seat and lid can be fitted. Approval: Complies with BS EN 997 for 4.5 litre flushing.
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
KWC Franke Stainless Steel Ovala Wash Basin
KWC FRANKE FR-OVALA wash hand basin is a satin finish Type 304 stainless steel basin suitable for use in vandal prone areas such as public toilets and schools.
The FR-OVALA basin is wall mounted with fixing through the rear of the basin using coach screws or similar to suit the wall structure.
KWC Stainless Steel Knee Operated Wash Basin
KWC ANIMA washbasin with knee actuation is manufactured from type 304 stainless steel-satin polish finish, material thickness 0.9 mm. Supplied complete with water spout positioned in rearright hand corner and 32 mm waste outlet. Note: The pre-mixing valve and the pipework linking the water spout to the knee operated front panel is all supplied with the washbasin.
Wall mounted by fitting a top joggle strip under the upstand return and by screw fixing through the integral rear brackets. Screws and plugs are not supplied.
Franke Planox Stainless Steel Washtrough - without tap ledge
Franke high quality wash troughs are ideally suited for installation in industrial workshops, sports facilities, school bathrooms and early childhood education facilities. The new Franke PLANOX range offers a functional, easy-to-clean and user-friendly solution whilst ensuring optimum hygiene. PLANOX washtroughs are seamlessly welded from the inside, making them highly resistant to dirt and bacteria build up.
MacDonald Security Drinking Fountain
MacDonald MS-DF is a vandal resistant wall mounted drinking fountain designed to be installed outside where spilled water can fall to ground.
Pressing the valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a 2L/min flow restrictor to ensure a uniform flow rate.
