Delabie Premix 'Nano' Thermostatic Mixing Valve
The Delabie ‘Nano’ thermostatic mixing valve is for control of mixed water distribution for 1 to 2 taps or 1 shower.
Temperature pre-set at 38°C, adjustable from 34 - 60°C. Anti-scalding safety between 34 - 42°C and automatic shut-off if cold or hot water supply fails. Minimum operating flow rate is 3L/min.
Supplied with integrated non-return valves and filters. Thermal shocks are possible without removing the valve.
Delabie Premix Comfort Thermostatic Mixing Valve
Delabie Premix Comfort is a group thermostatic mixing valve for mixed water distribution from 32° - 42°C giving anti-scalding safety. The valves regulate temperature variations and are supplied with filters and non-return valves that can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob).
OPERATION AND APPLICATIONS
Jrgumat Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgumat Thermoblending Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgutherm Flow Regulating Valve
The JRG 6320 valves are used in loop design applications where there is a number of "sub-loops" that require balancing in order to ensure even temperature throughout.
The 6320 thermo-regulating valve are normally positioned at the end of each sub-loop and will allow water to circulate through that sub-loop until the desired temperature is reached. At that point it will slowly close allowing hot water to pass to other sub-loops, thus maintaining a balance across the whole system.
MacDonald Anti Ligature Basin Bubbler
The MacDonald Security bubbler is designed to be installed over basins where there is potential for a high degree of vandalism or where there is a need to provide an non-ligature plumbing fitting.
The bubbler head is machined Type 304 stainless steel and the through wall tube is Type 304 threaded 1/2” BSP.
ASI Frameless Stainless Steel Mirror
AS8026 mirrors are fabricated from 1mm Type 304 stainless steel with a #8 mirror finish. The mirror has a 6mm thick Masonite waterproof tempered back board for strength and the stainless steel mirror is returned 8mm all around the backing board. The mirror has 4 x 5.5mm mounting holes ( 6 x holes on 610 x 910 size).
NOTE: The 8026 does not have the same reflective quality as glazed versions such as Model 20650 and some limited distortion is likely in very large sizes.
Delabie Through Wall Timed Flow Dual Basin Control Valve
DELABIE MS-747-2.. is a dual valve vandal resistant through wall water control designed to be installed through wall where there is an accessible duct directly behind the basin. The valve set is supplied with a 80 x 150mm dia. escutcheon plate.
Pressing a valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a pair of coloured indicators allowing it to be used for both CW and MW.
Also available with an extended round headed button to suit use in disabled bathrooms.
Delabie Through Wall Timed Flow Basin Control Valve
A vandal resistant through wall water control which is designed to be installed where there is an accessible duct directly behind the basin.
• The valve set is supplied with a 75mm dia.escutcheon plate.
• Pressing the valve button initiates immediate water flow.
• On release of button water will stop flowing within 3 seconds.
Also available with an extended round headed button to suit accessible bathroom.
Delabie Through Wall Timed Flow Control Valve
A vandal resistant through wall water control, designed to be installed through the backsplash of either the Franke wall mounted basins or Franke combi units.
• Pressing valve button initiates immediate water flow.
• On button release, water will continue to flow for 15 seconds.
Also available with an extended round headed button to suit use in accessible bathrooms.
