Franke Stainless Steel Guardian Wash Basin
The Franke HDTX450 is a satin finish Type 304 stainless steel basin. It is of one piece, seamless construction and is suitable for use in vandal prone areas such as public toilets and schools.
• It has a deep bowl with a 32mm waste.
Note: Basin is not pre-punched for taps but can be on special request.
• The basin is designed to be bolted through the wall where a plumbing duct exists.
MacDonald Security Drinking Fountain
MacDonald MS-DF is a vandal resistant wall mounted drinking fountain designed to be installed outside where spilled water can fall to ground.
Pressing the valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a 2L/min flow restrictor to ensure a uniform flow rate.
Wisa Inwall Cistern & Delabie Basin Valve Set
This is an in wall cistern combined with a Delabie timed flow valve. It offers a plumbing option for Franke combi units where flushing and only cold water is required. Ideal for use with limited water supply pipes where flush valves are not an option.
• Supplied with robust stainless steel push button assembly, which is screw fixed to the wall above the combi and basin bubbler.
• Supplied in a 6L capacity and only available as a single full flush.
• Pressing the BASIN button initiates a timed flow of water from the bubbler for 7 seconds.
Franke Stainless Steel Combination Toilet Pan & Wash Basin
Franke back to wall mounted combination stainless steel WC & basins are built for installation in high security areas such as police, prison and high court cells. Supplied as standard with LH toilet roll holder but can be supplied on special indent with RH toilet roll holder or without holder. Fabricated in 1.2 and 1.6mm Type 304 stainless steel with a satin finish, the combis are supplied standard without seats but can be fitted with seat pads, specify as required. All Franke WC’s are designed to flush with 6L of water.
Warden WA5 Cell Fixture Control System
Warden WA5 is primarily a cell water control product, providing limitation of use for showers, WC flushing and basin faucets.
Warden controllers use reliable piezo electric switch technology to activate low voltage solenoid valves and not only limit flow rates to plumbing fixtures but also restrict how often they can be used.
Delabie Tonic-Jet Shower Head
Delabie DE712000 ‘Tonic Jet’ is a recessed scale-resistant fixed shower head with a flow rate 6 lpm at 3 bar, giving it a 5-star WELS rating. The shower head has an automatic flow rate regulation, scale-resistant and ligature-resistant nozzle with adjustable spray, has a chrome-plated solid brass body, fixed with concealed blocking screw, systematically drains after use (no water retention or impurity deposits), and has an inlet connection M½".
Ideal for use in applications requiring a high degree of vandalism protection and water consumption minimisation.
Delabie Round Shower Head
Delabie DE709000 ‘Round’ is a vandal proof fixed shower head with an adjustable scale-proof nozzle that can be locked in place. Flow rate 6L/min at 300kPa through automatic flow rate regulator. Chrome plated solid brass with invisible anti-rotating blocking screw. Inlet connection M1/2”.
Ideal for use in applications requiring a high degree of vandalism protection and water consumption minimisation.
Delabie Wall Plate
Delabie DE824800 is an extra strong wall plate, designed for mounting Tempomix or Tempostop shower mixers/valves to reinforce their fixings. Supplied with 4 fixing screws, chrome plated finish, Ø80mm, 4mm thickness.
Delabie Anti-Ligature Shower Valve
DELABIE DE749628-AL is a recessed mounted time flow shower valve with anti-ligature protection. Time flow is ~30 seconds. Flow rate is pre-set at 12L/min at 300kPa, can be adjusted. When connected to a Delabie shower rose the actual flow rate will be 6L/min, 3 star WELS rating. Operating pressure is 100-500kPa, 300kPa is recommended. Bright polished stainless steel wall plate 160x160mm fixed by 4x Torx stainless steel security fixings with solid brass body. Recessing depth can be adjusted between 25-40mm. F1/2” water connections for mixed water supply.
Delabie Fixed Spout
Delabie cross wall spout L. 75mm, M1/2", for panels ≤ 30mm with anti-rotating pin. Threaded rod can be cut-to-size. Streamlined ligature-resistant design. Chrome-plated solid brass. Star-shaped scale-resistant flow straightener.