RAK Petit Washbasin With Shelf
RAK Petit is a collection of small washbasins designed for small spaces. With minimal shapes and small dimensions, RAK Petit includes deep-based washbasins that can be installed alone, with shroud, or with a RAK Joy cabinet to be used for storage too. The RAK Petit washbasin has a shelf to hold bags, phones, and personal belongings to hygineically keep these off the floor. The depth from wall of just 360mm allows for small bathrooms and cubicles and also meets the NZS4121 requirements of being less than 400mm off the wall.
Delabie Tempomatic 4 Electronic Wall Tap
Delabie Tempomatic 4 wall-mounted electronic basin tap, battery-operated with integrated 123 6V Lithium batteries. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 seconds every 24 hours after last use). Active infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated stainless steel body L. 190mm. Cap fixed in place by 2 concealed screws. Installation for panels from 1 - 24mm.
Delabie Stainless Steel Wall-Mounted Cleaners' Sink
Delabie wall-mounted sink with splashback manufactured from bacteriostatic 304 stainless steel with polished satin finish. Seam-free, pressed bowl, stainless steel thickness is 0.9mm. Deep sink 205mm. Smooth surface with rounded edges prevent injury. Supplied with 1½" waste and is without overflow. Supplied with fixing elements and splashback. Weight: 4.6kg.
Also available with bucket grid (as shown), see model DE182400-SP.
Delabie Stainless Steel Wall-Mounted SXS Knee Operated Washbasin
Delabie wall-mounted, knee-operated hand washbasin is manufactured from bacteriostatic 304 stainless steel with 0.8mm stainless steel thickness and with rounded edges to prevent injury. Supplied with splashback, swan-neck spout, soft-touch operation time flow tap with 7-second time flow and premixer with non-return valves. Flat perforated waste, without screws, easy to clean and vandal-resistant. Water savings, flow rate pre-set at 3 lpm. Maximum hygiene, no manual contact with tap. Without overflow. Supplied with fixing elements. Weight: 4.3kg.
Delabie Bob Heavy Duty Stainless Steel Washbasin
Delabie Bob Heavy Duty wall-mounted washbasin is manufactured from bacteriostatic 304 stainless steel, polished satin finish, stainless steel thickness is 1.2mm. Vandal-resistant shrouded basin, concealed trap, with reinforced mounting frame. Basin internal diameter is 310mm. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with 1½" waste and trap. Without overflow. Supplied with fixing elements. Weight: 5.5kg.
Delabie Bob Stainless Steel Wall-Mounted Washbasin
Delabie Bob wall-mounted washbasin has a clean and simple design. Manufactured from bacteriostatic 304 stainless steel, polished satin finish, stainless steel thickness is 1.2mm. Vandal-resistant shrouded basin, concealed trap, with rounded edges to prevent injury. Basin internal diameter is 310mm. Quick and easy to install from the front thanks to a stainless steel mounting frame.
Delabie Bob Stainless Steel Wall-Mounted Washbasin
Delabie Bob wall-mounted washbasin has a clean and simple design. Manufactured from bacteriostatic 304 stainless steel, polished satin finish, stainless steel thickness is 1.2mm. Vandal-resistant shrouded basin, concealed trap, with rounded edges to prevent injury. Basin internal diameter is 310mm. Quick and easy to install from the front thanks to a stainless steel mounting frame.
Delabie Fino Stainless Steel Top Inlet Wall-Hung Urinal
Delabie Fino wall-hung individual rimless urinal is manufactured from bacteriostatic 304 stainless steel, with a polished satin finish. Stainless steel thickness is 1.2mm. On this DE135110 model, the water inlet is in the top (exposed), with recessed or exposed horizontal waste outlet and with concealed trap. Quick and easy to install to from the front thanks to a stainless steel mounting frame. Supplied with a 1½" P trap and with fixing elements. Weight: 3.5kg.
See our Urinal Flushing section for a suitable option.
Delabie Fino Stainless Steel Rear Inlet Wall-Hung Urinal
Delabie Fino wall-hung individual rimless urinal is manufactured from bacteriostatic 304 stainless steel, with a polished satin finish. Stainless steel thickness is 1.2mm. On this DE135710 model the water inlet is in the back / rear (recessed), with recessed or exposed horizontal waste outlet and with concealed trap. Quick and easy to install to from the front thanks to a stainless steel mounting frame. Supplied with a 1½" P trap and with fixing elements. Weight: 3.5kg.
See our Urinal Flushing section for a suitable option.
Delabie Fino Stainless Steel Rear Inlet Wall-Hung Urinal
Delabie Fino wall-hung individual rimless urinal is manufactured from bacteriostatic 304 stainless steel, with a polished satin finish. Stainless steel thickness is 1.2mm. On this DE135710 model the water inlet is in the back / rear (recessed), with recessed or exposed horizontal waste outlet and with concealed trap. Quick and easy to install to from the front thanks to a stainless steel mounting frame. Supplied with a 1½" P trap and with fixing elements. Weight: 3.5kg.
See our Urinal Flushing section for a suitable option.