Zurn Sink Faucet For Cleaners Sink
Zurn Z-SF is a purpose made commercial grade wall mounted faucet suitable for use above cleaners sinks.
It is polished chrome plated cast brass with 1/4 turn ceramic disc cartridges, with eccentric swivel inlets allowing adjustable centres from 184mm to 222mm. Inlets include integral isolators allowing inline servicing. Valve spout includes chemical resistant vacuum breaker for backflow protection and 3/4" hose connection allowing use of Zurn Z-HH short hose. Valve has adjustable wall brace and bucket hook allowing buckets to be hung off faucets while filling.
Zurn Floor Mounted Mop Sink
Zurn Z-1996 mop service basin is made of a molded high density composite, designed for commercial applications for use in back-osff-house applications, and includes a PVC drain body, stainless steel strainer and 3" gasketed outlet connection.
Options available to add to your cleaners sink are as shown below and can be seen under MODELS:
KWC Stainless Steel Cleaners Sink
KWC FRCS is a wall mounted, one-piece pressed Type 304 stainless steel cleaners sink. Available with or without a back-splash and with or without a bucket grid. Measurements are 600 x 500 x 344mm (WDH including brackets).
KWC high quality cleaners sinks are ideally suited for installation in industrial workshops, sports facilities, school bathrooms, hospitals, care facilities and early childhood education facilities.
These sinks are best fitted with our Zurn Z-SF sink faucet (see separate data sheet) which comes with an integrated vacuum break and bucket hook on the spout.
KWC Stainless Steel Accessible Compliant Toilet Suite
The KWC FRFM5-300VP is a disabled compliant stainless steel back to wall/ floor mounted toilet suite. It is suitable when vandal resistant products are required.
The FRFM5 toilet suite is available with either cistern or flush valve options, depending on foot traffic.
KWC Accessible Compliant Stainless Steel Wall Mounted Toilet Pan
Wall mounted disabled compliant toilet pan, fabricated in 1.6mm Type 304 stainless steel with a satin finish. Built for areas where vandalism is likely to cause damage to ceramic toilet's. It is designed for face wall or through wall mounting where structural wall is capable of supporting required load. They are 3 Star WELS rated when installed with a similarly rated flushing device.
KWC Stainless Steel Accessible Floor Mounted Toilet Pan
KWC Accessible Compliant floor mounted WC pan for disabled,
- type 304 stainless steel,
- Surface satin finished,
- material thickness 1,5 mm,
- concealed flushing rim
- min. 6 liter flushing capacity
- shrouded 100 mm diameter horiziontal 'P' trap outlet,
- pressed seat area tapered towards centre,
- all edges curved.
Fixings not included.
Dimensions 360 x 450 x 700 mm (W x H x L)
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
Franke Stainless Steel Guardian Wash Basin
The Franke HDTX450 is a satin finish Type 304 stainless steel basin. It is of one piece, seamless construction and is suitable for use in vandal prone areas such as public toilets and schools.
• It has a deep bowl with a 32mm waste.
Note: Basin is not pre-punched for taps but can be on special request.
• The basin is designed to be bolted through the wall where a plumbing duct exists.
KWC Stainless Steel Knee Operated Wash Basin
KWC ANIMA washbasin with knee actuation is manufactured from type 304 stainless steel-satin polish finish, material thickness 0.9 mm. Supplied complete with water spout positioned in rearright hand corner and 32 mm waste outlet. Note: The pre-mixing valve and the pipework linking the water spout to the knee operated front panel is all supplied with the washbasin.
Wall mounted by fitting a top joggle strip under the upstand return and by screw fixing through the integral rear brackets. Screws and plugs are not supplied.
Delabie Deck Mount Single Hole Mixer With Extension Column - 100lpm
DELABIE DE5610 is a deck mounted mixer for commercial kitchens with extension column and swivelling tubular spout. Rapid fill flow rate 100L/min at 300kPa. Chrome plated brass body and spout, shock resistant ball levers for withstanding intensive use. Spout H.560mm L.300mm with smooth interior for reduced bacterial development and star shaped flow straightener. Operating pressure 100-500kPa, 300 kPa recommended. Reinforced fixing through Ø50mm hole with Ø14x16mm copper pipe water inlets.
