Delabie Black Binoptic Mix Electronic Mixer
Delabie DE378MCHB is a deck mounted matte black electronic basin mixer with independent IP65 electronic control unit and shock-proof infrared presence detection sensor at the end of the spout. Available as 230/12V mains supply with transformer or 6V Lithium battery power. Anti-bacterial duty flush operates for ~60 seconds every 24 hours after last use. Side temperature control with adjustable maximum temperature limiter. Flow rate is pre-set at 3L/min at 300kPa, can be adjusted from 1.4 to 6L/min. Operating pressure is 100-500kPa, 300kPa is recommended.
Delabie Tempomatic 4 Electronic Basin Tap
Delabie Tempomatic 4 wall-mounted electronic basin tap, battery-operated with integrated 123 6V Lithium batteries. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.4 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 seconds every 24 hours after last use). Active infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated stainless steel body L. 130mm. Cap fixed in place by 2 concealed screws. Anti-blocking security. Stopcock supplied.
DVS Thermostatic Mixing Valve 4 IN 1
DV-TMV20 is a high quality thermostatic mixing valve, approved for use in basins, showers, bidets and highpressure bath fill applications (above 1 bar), under the UK NHS TMV3 approval scheme which guarantees a drip tight closing of HW supply should there be CW failure. This makes it ideal for critical healthcare applications.
The valve is designed to control the mixed water outlet temperature to within +/- 2°C regardless of fluctuations in the temperature and pressure of the hot and cold water supplies.
ASI Stainless Steel Inter-Lok Framed Mirror
The ASI 0600 series mirror has a stainless steel inter-lok angle frame with either standard plate glass or tempered glass options. The 19x16mm frame is roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish. The frame is formed seamless with mitred corners, welded, polished and have gently radiused edges to provide added strength and an appealing aesthetic. Mirror edges are protected with friction and chafe absorbing fillers.
KWC DVS High Security Basin
KWC DVS DV-VR01-081 is a high security washbasin designed and tested to be vandal-proof and avoid ligature points wherever possible. This model a no tap hole variant and is suited to combine with a MacDonald Security washbasin control set available in electronic or mechanical.
Watts Eurotherm Thermostatic Mixing Valve
Watts Eurotherm TRL117 is a thermostatic mixing valve designed to supply sinks and washbasins with tempered water not exceeding the set temperature (up to 5 washbasins depending on tap flow rate). This mixer is ideal for schools, restaurants, laboratories,, offices, correctional, etc...anywhere needing a supply of water at a pre-set temperature on site. Hot water supply cut totally and immediately is cold water supply is interupted.
PROTECTION AGAINST LEGIONELLA
MacDonald Bariatric Folding Shower Seat
The MacDonald bariatric folding shower seat is made for bariatric patients and comes with Satin Stainless Steel mounting and legs. The white acrylic seat features white-slotted, slip resistant decking with rounded edges. This bariatric shower seat will take a static load rating of 350kg, as opposed to the standard shower seat. When not in use this shower seat will fold up against the wall.
Dimensions: 960 x 400 x 475 mm (L x W x H)
Note that this does not comply with the NZS4121 for accessible bathrooms due to the size requirements of 800x450mm.
Solo Electronic Dual Flush Valve
MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.
Franke Stratos Paper Towel Dispenser
Franke Stratos Paper Towel Dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
1x AVAILABLE
Franke Stratos Paper Towel Dispenser
Paper towel dispenser for wall mounting, stainless steel, surface satin finished, front with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 1.5 mm, curved front cover, cylinder lock with Franke standard key, inspection window on front, loading capacity 300 - 400 pcs. of paper depending on convolution, includes stainless steel screws and dowels.
Dimensions 300 x 305 x 134 mm (W x H x D)
