Zurn Spare Parts
Whilst we expect all Zurn valves to give years of trouble free life, there will be a time when maintenance will be required in order to ensure correct flush volumes and correct pan evacuation.
The enclosed Spare Parts sheets will enable the maintenance personnel to recognise the valve installed and choose the necessary spare parts required. The Trouble Shooting Guide will help to determine the cause of the problem.
The most common spare parts are listed under the MODELS tab, you can see the images of these if you scroll through the images on this page.
Zurn Recessed Single Flush Valve
Zurn ZH6152 is a concealed mounted toilet pan flush valve designed to be installed in a plumbing duct with a remote hydraulic push button mounted on the wall directly above the toilet pan. Depending on the model of valve chosen, it may be installed connected to mains pressure water supply or from a non potable supply tank.
Pressing the button delivers a metered 6L flush (adjustable) irrespective of pressure variations.
Zurn Dual Flush Valve
Zurn ZDF6152-XL is a recess mounted toilet flush valve designed to be connected to mains pressure water supply. It is also available as a non potable valve where water is supplied from a dedicated supply tank or from a pressurized recycled water feed. The 2 button plate allows the user the option of flushing 3 or 6L. Flush volumes are consistent irrespective of pressure variations. The product is specified in 2 parts: the inwall valve is common to all versions - ref ZDF6152XL (L). The customer must then chose the type of face plate based on the Tech Data sheet (see Downloads)
WISA 300VP High Security Inwall Cistern
The Wisa WS300VP high security inwall cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing.
The cistern is supplied with a robust stainless steel push button assembly which is screw fixed to the wall, a pneumatic actuator and pneumatic tubing allowing flexibility of button mounting point.
The inwall cistern is supplied as standard in a 6L capacity and is only available as a single full flush. Full duct access must be available to the WS300VP for servicing purposes.
Franke Stainless Steel Pod Urinal
High quality satin finish Type 304 stainless steel urinal, complete with 40mm waste.
FR-CMPX538 is a surface mounted back inlet urinal, suitable for connection to mains pressure flushing valves such as Delabie 779 128, 779 427, and 778 800 recess mounted valves. When installed, the urinals can acheive a WELS rating of 3 Stars. Alternatively, where up to 4 urinals are installed on a common wall, a Zurn Z6190WG flushing valve complete with Water Guard sensor could be used for similtaneous flush and flushing regulation on
user detection.
KWC Franke Stainless Steel Toilet Suite
The KWC Franke FRFM4-300VP is a standard height stainless steel back to wall/ floor mounted toilet suite. It is suitable when vandal resistant products are required.
The cistern tank provided is WISA 300VP, which is surface mounted, behind a robust stainless steel cover.The pneumatic actuator is fitted on this. This is only available in a single 6L flush version.
KWC Franke Stainless Steel Floor Mounted P or S Trap Toilet Pan
KWC FRANKE FRFM4 is a floor mounted stainless steel P trap toilet pan with side access panels. It is fully shrouded with anti-ligature flushing rim with sufficient room inside the shroud to enable it to be converted to an S Trap if preferred.
The top fascia plate is convexed to prevent pooling of liquid. Seat or seat pads can be supplied but can only be fitted at time of ordering.
For flushing options, please refer to the Zurn flush valves, Warden control system or Wisa inwall cistern.
Warning: Do not use dimensions for set out purposes.
KWC Heavy Duty Stainless Steel Wall Mounted Toilet Pan
KWC HEAVY-DUTY Wall hung WC pan, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, type 304 stainless steel, surface satin finished, material thickness 1,5 mm, flushing certificated to EN 997, concealed flushing rim with min. 4 liter flushing capacity, with a shrouded 100 mm diameter horizontal 'P' trap outlet, pressed seat area tapered towards centre, all edges curved, fixing with 280 mm stainless steel rods and screw nuts (included) through the wall. 4 litre flush EN 997 approved.
Dimensions 360 x 351 x 500 mm (W x H x D)
KWC Heavy Duty Stainless Steel Floor Mounted Toilet Pan
KWC Heavy-Duty floor standing WC pan for fitting through duct wall, manufactured from type 304 stainless steel, material thickness 1,5 mm for the pan and shroud - satin polish finish. The WC incorporates a stainless steel P trap 102 mm o/d. A separate mounting plate and 4 bolts are provided for mounting the WC through a duct wall. The Campus WC has a pressed seating area that does not require a separate seat in vandal prone installations. However, a seat and lid can be fitted. Approval: Complies with BS EN 997 for 4.5 litre flushing.
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
