Jrgumat Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgumat Thermoblending Mixing Valve
JRGumat thermoblending valves are primarily designed to provide mixed water for a circulation loop plumbing design. The loop design is used where plumbing fixtures requiring hot or mixed water are long distances from the heating source.
By pumping the water around a loop in the building, fittings can draw from a hot water source close to the outlet, thus reducing the need to wait for hot water to come through pipes. This can be a major energy saving.
Jrgutherm Flow Regulating Valve
The JRG 6320 valves are used in loop design applications where there is a number of "sub-loops" that require balancing in order to ensure even temperature throughout.
The 6320 thermo-regulating valve are normally positioned at the end of each sub-loop and will allow water to circulate through that sub-loop until the desired temperature is reached. At that point it will slowly close allowing hot water to pass to other sub-loops, thus maintaining a balance across the whole system.
ASI Single Toilet Roll Holder With Hood
ASI 7402-HS is a recess mounted single roll toilet paper dispenser for standard core roll toilet paper with hood and dispenses all standard core roll toilet paper up to 150mm diameter. Fabricated of stainless steel type 304, all exposed surfaces are finished in either satin or bright finish. Standard roll holders are made from high impact ABS plastic finished with chrome plating. Hood is attached with a full-length brass pivot rod. The AS7402-HS is ideal for all bathrooms and is especially suitable for accessible bathrooms.
Delabie Accessible Corner Shower Curtain Rail Kit
DELABIE DE382SP is a shower curtain rail set for the accessible bathroom shower that meets the requirements of Acceptable Solutions G1/AS1 Accessible shower compartment. DE382SP is supplied in kitset format with 1100x1100mm Ø20mm stainless steel tubular curtain rails and **1.80m high PVC curtains. Each set is supplied with a 1.00m stainless steel ceiling support strut which should be positioned as close as possible to the rail corner. The strut can be cut on site to suit ceiling heights less than 3.00mtr.
ASI Fold Up Shower Seat
A 304 stainless steel framed and supported shower seat, which is suitable for any commercial washroom space where seating is required for ease of showering.
ASI Recess Mounted Soap Holder
The ASI recess mounted soap holder designed for wet or dry wall installations. It is manufactured seamless of one-piece 22 gauge stainless steel Type 304 stainless steel with satin or bright finish. It has a raised lip which prevents the soap from slipping out of the holder.
KWC Franke Stainless Steel Oval-A Wash Basin With Shroud
KWC FRANKE FR-OVALA-ACC wash hand basin is a satin finish Type 304 stainless steel basin suitable for use in vandal prone areas such as public toilets and schools. This basin is supplied with a stainless steel trap cover which gives protection for the user from exposed pipework beneath the basin.
Zurn Recess Mounted Sluice Sink Flush Valve
Zurn Model ZH-6152XL-SL flush valve is a hydraulically actuated mains pressure sluice sink flushing valve with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has acheived the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.
Zurn Exposed Mounted Sluice Sink Flush Valve
Zurn Model Z-6000XL-SL flush valve is a manually operated sluice sink flushing valve with toggle handle actuation with an approved vacuum breaker allowing direct connection to potable water supply without any additional backflow protection. The standard valve is pre-set to deliver a 6L flush and has achieved the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.
Pipework design is critical to correct valve operation and must be completed by a suitably qualified person.