Delabie Temposoft 2 Time Flow Urinal Valve
DELABIE DE777130 is a recessed mounted time flow urinal valve with a soft touch operation. Soft touch operation allows users to press the control with no effort especially children, elderly or people with reduced physical ability. Time flow is ~3 seconds. Flow rate is pre-set at 0.15L/second at 300kPa, can be adjusted. Operating pressure is 150-500kPa, 300kPa is recommended. Bright polished stainless steel wall plate Ø130mm with solid brass body. M1/2” water connections for water supply.
Suitable for use on all our back inlet wall hung urinals.
Waterguard Urinal Sensor
Water Guard has been New Zealands preferred urinal water control system since 1985. Using microwave technology (rather than Infra-red) Water Guard has the ability to be installed behind a ceiling or wall lining making it an unobtrusive, vandal proof installation.
Zurn Spare Parts
Whilst we expect all Zurn valves to give years of trouble free life, there will be a time when maintenance will be required in order to ensure correct flush volumes and correct pan evacuation.
The enclosed Spare Parts sheets will enable the maintenance personnel to recognise the valve installed and choose the necessary spare parts required. The Trouble Shooting Guide will help to determine the cause of the problem.
The most common spare parts are listed under the MODELS tab, you can see the images of these if you scroll through the images on this page.
Zurn Exposed Single Flush Valve
Zurn Z6000 is an exposed mounted, chrome plated toilet pan flushing valve designed to be installed directly above the toilet pan which it serves. Depending on the model of valve chosen, it may be connected to mains pressure water supply, or from a non potable supply tank. Deflecting the toggle lever delivers a metered 6L flush.
Zurn Recessed Single Flush Valve
Zurn ZH6152 is a concealed mounted toilet pan flush valve designed to be installed in a plumbing duct with a remote hydraulic push button mounted on the wall directly above the toilet pan. Depending on the model of valve chosen, it may be installed connected to mains pressure water supply or from a non potable supply tank.
Pressing the button delivers a metered 6L flush (adjustable) irrespective of pressure variations.
Zurn Dual Flush Valve
Zurn ZDF6152-XL is a recess mounted toilet flush valve designed to be connected to mains pressure water supply. It is also available as a non potable valve where water is supplied from a dedicated supply tank or from a pressurized recycled water feed. The 2 button plate allows the user the option of flushing 3 or 6L. Flush volumes are consistent irrespective of pressure variations. The product is specified in 2 parts: the inwall valve is common to all versions - ref ZDF6152XL (L). The customer must then chose the type of face plate based on the Tech Data sheet (see Downloads)
Wisa XS Delos Push Panel Dual Flush
Wisa push panels are available as dual flush and come in several finishes. In line with the latest trends and developments special control panels have been designed for toilet systems. These Dualflush panels with a water-saving button are made of high-quality plastic, stainless steel or tempered glass and are available in various designs and colours. There is a wide choice of contemporary flush plates.
Wisa XS Mont Inwall Cistern
The Wisa Mont XS Inwall Cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing. The cistern can use either the mechanical XS push panels or pneumatic push panels. The cistern has the following features;
Wisa XS Framed Inwall Cistern
The Wisa XS Framed Inwall Cistern is a pre-assembled cistern with structural support frame for use with all wall hung toilet pans. The Wisa XS inwall cistern is ideal for use where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing. The cistern can use either the mechanical or pneumatic push panels. The cistern has the following features;
WISA 300VP High Security Inwall Cistern
The Wisa WS300VP high security inwall cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing.
The cistern is supplied with a robust stainless steel push button assembly which is screw fixed to the wall, a pneumatic actuator and pneumatic tubing allowing flexibility of button mounting point.
The inwall cistern is supplied as standard in a 6L capacity and is only available as a single full flush. Full duct access must be available to the WS300VP for servicing purposes.
