KWC Anima Wall Mounted Drinking Fountain
KWC ANIMA wall-mounted drinking fountain, stainless steel, satin finished surface, material thickness 1.2 mm, seamlessly integrated flat bowl without overflow, rectangular drinking fountain shape with rounded edges, two tap holes including cover, strainer waste G 1 1/4 B, including mounting material.
Dimensions 310 x 200 x 260 mm (W x H x D)
Bowl dimensions 256 x 20 x 210 mm (W x H x D)
Drinking fountain tap and/or bottle filler tap must be ordered separately.
Operating pressure is 50-500kPa, 300kPa is recommended
RAK Caroline Back To Wall Toilet Pan
The Caroline toilet range adds a touch of serenity to the bathroom. This spacious bathroom range is European designed and is easy to clean.
Caroline is available in wall faced toilet suite or wall faced toilet pan (as shown) formats.
RAK Caroline Wall Faced Toilet Suite
The Caroline toilet range adds a touch of serenity to the bathroom. This spacious bathroom suite is European designed and is easy to clean.
Caroline is available in wall faced toilet suite (as shown) or wall faced toilet pan formats.
RAK Resort Rimless Wall Faced Toilet Pan
Resort toilet range combines aesthetics and practicality in an elegant manner while its compact form uses space economically, making the bathroom area feel luxuriously spacious.
The Resort bathroom suite comes standard with Rimless technology which delivers the ultimate in hygienic bathroom suites. Rimless technology ensures water is fully projected around the front of the toilet pan giving a completely clean flush. Rimless flushing makes it easier to clean and reduces bacteria and dirt by more than 90%.
KWC Stainless Steel Pod Urinal
High quality satin finish Type 304 stainless steel urinal, complete with 40mm waste.
FR-CMPX538 is a surface mounted back inlet urinal, suitable for connection to mains pressure flushing valves such as Delabie 779 128, 779 427, and 778 800 recess mounted valves. When installed, the urinals can acheive a WELS rating of 3 Stars. Alternatively, where up to 4 urinals are installed on a common wall, a Zurn Z6190WG flushing valve complete with Water Guard sensor could be used for similtaneous flush and flushing regulation on
user detection.
KWC Franke Stainless Steel Toilet Suite
The KWC Franke FRFM4-300VP is a standard height stainless steel back to wall/ floor mounted toilet suite. It is suitable when vandal resistant products are required.
The cistern tank provided is WISA 300VP, which is surface mounted, behind a robust stainless steel cover.The pneumatic actuator is fitted on this. This is only available in a single 6L flush version.
KWC Franke Stainless Steel Floor Mounted P or S Trap Toilet Pan
KWC FRANKE FRFM4 is a floor mounted stainless steel P trap toilet pan with side access panels. It is fully shrouded with anti-ligature flushing rim with sufficient room inside the shroud to enable it to be converted to an S Trap if preferred.
The top fascia plate is convexed to prevent pooling of liquid. Seat or seat pads can be supplied but can only be fitted at time of ordering.
For flushing options, please refer to the Zurn flush valves, Warden control system or Wisa inwall cistern.
Warning: Do not use dimensions for set out purposes.
KWC Heavy Duty Stainless Steel Wall Mounted Toilet Pan
KWC HEAVY-DUTY Wall hung WC pan, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, type 304 stainless steel, surface satin finished, material thickness 1,5 mm, flushing certificated to EN 997, concealed flushing rim with min. 4 liter flushing capacity, with a shrouded 100 mm diameter horizontal 'P' trap outlet, pressed seat area tapered towards centre, all edges curved, fixing with 280 mm stainless steel rods and screw nuts (included) through the wall. 4 litre flush EN 997 approved.
Dimensions 360 x 351 x 500 mm (W x H x D)
KWC Heavy Duty Stainless Steel Floor Mounted Toilet Pan
KWC Heavy-Duty floor standing WC pan for fitting through duct wall, manufactured from type 304 stainless steel, material thickness 1,5 mm for the pan and shroud - satin polish finish. The WC incorporates a stainless steel P trap 102 mm o/d. A separate mounting plate and 4 bolts are provided for mounting the WC through a duct wall. The Campus WC has a pressed seating area that does not require a separate seat in vandal prone installations. However, a seat and lid can be fitted. Approval: Complies with BS EN 997 for 4.5 litre flushing.
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
