Wilkins Reduced Pressure Zone Valve 975XL Series 15mm
The 975XL was designed for installation in very tight locations. Typically high hazard applications such as beverage machines require installation in small, inaccessible areas.
975XL - Standard model c/w ball valves.
975LXL - Less shut-off valves.
975XLS - Supplied with strainer.
975XLF - Supplied with integrated filter in inlet ball valve.
Wilkins Reduced Pressure Zone Assembly 375 Series 65-250mm
The Zurn Wilkins 375 Reduced Pressure Principle Backflow Assembly (RPZ) is utilized where a potential high health hazard exists and is ideal for use when lead-free valves are required protecting against both backsiphonage and backpressure of conta
W65375 - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 65mm.
W65375L - Same as W65375 but less gate valves.
W65375FSC - Same as W65375 C/W 2x Table E NRS Gate Valves & 1x Table E Strainer.
W80375 - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 80mm.
W80375L - Same as W80375 but less gate valves.
W80375FSC - Same as W80375 C/W 2x Table E NRS Gate Valves & 1x Table E Strainer.
W100375D - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 100mm With Table D Flange Ends, C/W 2x NRS Gate Valves.
W100375LD - Same as W100375D but No Gate Valves.
W100375DALD - Same as W100375D but with Metered Bypass, No Gate Valves.
W100375DFSC - Same as W100375D but with strainer.
W100375E - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 100mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W100375LE - Same as W100375E but less gate valves.
W100375DALE - Same as W100375E but with Metered Bypass, No Gate Valves.
W100375EFSC - Same as W100375E but with strainer.
W100375AL - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 100mm With Grooved Ends, No Gate Valves.
W100375ALDAL - Same as W100375AL but with Meterd Bypass.
W150375 - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 150mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W150375L - Same as W150375 but less gate valves.
W150375AL - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 150mm With Grooved Ends, No Gate Valves.
W150375DAL - Same as W150375 but with Metered Bypass, No Gate Valves.
W150375FSC - Same as W150375 but with strainer.
W200375 - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 200mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W200375L - Same as W200375 but less gate valves.
W200375AL - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 200mm With Grooved Ends, No Gate Valves.
W200375DAL - Same as W200375 but with Metered Bypass, No Gate Valves.
W200375FSC - Same as W200375 but with strainer.
W250375 - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 150mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W250375L - Same as W250375 but less gate valves.
W250375AL - Wilkins Reduced Pressure Zone Assembly (RPZ) 375 Series 150mm With Grooved Ends, No Gate Valves.
W250375DAL - Same as W250375 but with Metered Bypass, No Gate Valves.
Wilkins Reduced Pressure Zone Assembly c/w Metered Bypass 375DA Series 65-250mm
Wilkins 375 valves are light weight and have a very low head loss of pressure. Ductile iron body construction drastically reduces the weight that is normally asociated with gray iron bodies, and the patented Compound Check took head loss to lows
375DAE - Standard model c/w Table E NRS gate valves
375DAD - As above but Table D gate valves
375DAL - Less gate valves
375ADAL - With grooved backflow body less gate valves
Wilkins Vertical Reduced Pressure Zone Valve 475 Series 65-250mm
Wilkins 475 valves are light weight and have a very low head loss of pressure. Ductile iron body construction drastically reduces the weight that is normally asociated with gray iron bodies, and the patented Compound Check took head loss to lows
475 - Standard model c/w NRS gate valves
475L - Less gate valves
475OSY - Supplied with OS&Y gate valves
475DAV - Supplied with metered bypass and OS&Y gate valves
Wilkins Pressure Vacuum Breaker 720A Series
The Wilkins 720A pressure vacuum breaker is designed to prevent the backsiphonage of contaminated water from an irrigation system back into the potable water supply. With its all bronze body and top construction and the use of silicone elastomers
720A - standard model
720AL - less shut-off valves
720AFT - supplied with fast-test test cocks
Wilkins Atmospheric Vacuum Breaker 35 Series
The Wilkins model 35 vacuum breaker is an economical way of prevent contaminated irrigation water from entering the potable supply due to backsiphonage. The 35's bronze construction ensures that the vacuum breaker will provide years of service in
35 - Standard model as shown
35CH - Rough chrome finish
Wilkins Spill Resistant Pressure Vacuum Breaker
The Wilkins Model 460 is ideal for use where Lead-Free* valves (*Less than 0.25% Weighted Average Lead Content) are required.
W12-460 - Wilkins Spill Resistant Pressure Vacuum Breaker 15mm.
W19-460 - Wilkins Spill Resistant Pressure Vacuum Breaker 20mm.
W25-460 - Wilkins Spill Resistant Pressure Vacuum Breaker 25mm.
Wilkins Double Check Valve Assembly 350 Series 20-50mm
The Wilkins model 350 double check valve assembly with its revolutionary removable pressure vessel, is designed to protect against backpressure and backsiphonage of polluted water into the potable water supply. In addition to the removable pressur
350 - Standard model c/w 2 x ball valves
350L - Less ball valves
350S - Supplied with 2 x ball valves and 1 x Y strainer
350F - Supplied with Filterball inlet valve and 1 x outlet ball valve
Wilkins Top Access Double Check Valve Assembly 950XLT Series 20-50mm
When double check valve assemblies are installed in valve boxes, it is advantageous to have top access to the check valves and test cocks. The Wilkins 950XLT embodies these advantages. Both check valve access covers and test cocks are angled upw
950XLT - Standard model c/w ball valves
950LXLT - Less shut-off valves
950XLTS - Supplied with strainer
950XLTF - Supplied with integrated filter in inlet ball valve
Wilkins Double Check Valve 350 Series 65-250mm
The Zurn Wilkins 350 Double Check Valve Backflow Preventer provides low hazard protection for all applications. The flanged, epoxy coated ductile iron body is available with multiple shut-off valve options for installation versatility.
W65350 - Wilkins Double Check Backflow Preventor (DCV) 350Series 65mm.
W65350L - Same as W65350 but less gate valves.
W65350FSC - Same as W65350 C/W 2x Table E NRS Gate Valves & 1x Table E Strainer.
W80350 - Wilkins Double Check Backflow Preventor (DCV) 350 Series 80mm.
W80350L - Same as W80350 but less gate valves.
W80350FSC - Same as W80350 C/W 2x Table E NRS Gate Valves & 1x Table E Strainer.
W100350D - Wilkins Double Check Backflow Preventor (DCV) 350 Series, 100mm With Table D Flange Ends, C/W 2x NRS Gate Valves.
W100350LD - Same as W100350D but No Gate Valves.
W100350DALD - Same as W100350D but with Metered Bypass, No Gate Valves.
W100350DFSC - Same as W100350D but with strainer.
W100350E - Wilkins Double Check Backflow Preventor (DCV) 350 Series, 100mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W100350LE - Same as W100350E but less gate valves.
W100350DALE - Same as W100350E but with Metered Bypass, No Gate Valves.
W100350EFSC - Same as W100350E but with strainer.
W100350AL - Wilkins Double Check Backflow Preventor (DCV) 350 Series 100mm With Grooved Ends, No Gate Valves.
W100350ALDAL - Same as W100350AL but with Meterd Bypass.
W150350 - Wilkins Double Check Backflow Preventor (DCV) 350 Series, 150mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W150350L - Same as W150375 but less gate valves.
W150350AL - Wilkins Double Check Backflow Preventor (DCV) 350 Series, 150mm With Grooved Ends, No Gate Valves.
W150350DAL - Same as W150350 but with Metered Bypass, No Gate Valves.
W150350FSC - Same as W150350 but with strainer.
W200350 - Wilkins Double Check Backflow Preventor (DCV) 350 Series 200mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W200350L - Same as W200350 but less gate valves.
W200350AL - Double Check Backflow Preventor (DCV) 350 Series 200mm With Grooved Ends, No Gate Valves.
W200350DAL - Same as W200350 but with Metered Bypass, No Gate Valves.
W200350FSC - Same as W200350 but with strainer.
W250350E - Wilkins Double Check Backflow Preventor (DCV) 350 Series, 250mm With Table E Flange Ends, C/W 2x NRS Gate Valves.
W250350LE - Same as W250350E but less gate valves.
W250350DALE - Same as W250350E but less gate valves.
W250350AL - Wilkins Double Check Backflow Preventor (DCV) 350 Series 250mm With Grooved Ends, No Gate Valves.
W250350ALDAL - Same as W250350AL but with Metered Bypass, No Gate Valves.
