
Wilkins Double Check Valve 350DA Series 65-250mm
Designed for installation on potable water connections in fire sprinkler systems to protect against both backsiphonage and backpressure of polluted water into the potable water supply.
350DAE - Standard valve complete with 2 x Table E flanged NRS Gate Valves.
350DAD - As above but with Table D flanges.
350DALE - Same as 350DAE but less Gate Valves.
350DALD - Same as 350DAD but less gates.
350ADAL - Roll groove body less gates.

Wilkins Double Check Valve 450 Series 65-250mm
Designed for installation on potable water lines to protect against both back-siphonage and back-pressure of polluted water into the potable water supply. The Model 450 shall provide protection where a potential health hazard does not exist.
450 - Standard valve complete with NRS (Non-Rising Stem) Gate Valves.
450G - Same as 450 but with groover x groove end connections.
450FG - Same as 450 but with flanged inlet and grooved outlet connections.

Hose Tap Vacuum Breaker
The Model BFP-8 is designed for installation on potable water lines such as service sinks, laundry tubs and hose bibb taps to protect against back-sipohonage of polluted water into the potable water supply. A break-away set screw is included to p
WBFP8 - Standard model as shown
WBFP8-CH - Same as standard model but in chrome plated finish
WBFP20 - Same as standard model but for 20mm hose tap

Wilkins Freeze Prevention Valve
The Wilkins model W14-ZWFR freeze prevention valve is ideal for regions where occasional / unexpected freezes occur, yet winterisation (blow-out) is not common.
W14-ZWFR - Standard model as shown.

Backflow Prevention Assembly Test Kit
The Model BF-TG3 backflow prevention assembly test kit is designed for testing all brands of pressure type vacuum breakers, double check valve, and reduced pressure principle backflow prevention assemblies. The BF-TG3 is capable of performing all
BF-TG3 - Standard model as shown.

Wilkins Pilot Operated Pressure Reducing Valve
The Wilkins Model ZW209 pilot operated pressure reducing valve is designed for many applications where the reduction of high inlet pressures to safe and stable outlet pressure is required.
ZW209FP - Standard model as shown.

Wilkins Pressure Reducing Valve
The Wilkins Model ZW209 pressure reducing valve automatically reduces a higher inlet pressure to a steady lower downstream pressure regardless of changing flow rate and/or varying inlet pressure.
ZW209 - Standard model as shown.
ZW209BP - Same as ZW209 but with low flow bypass.

Wilkins Pressure Reducing Valve
The Wilkins Model NR3 is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems that require fre
NR3 - Standard valve as shown.

Wilkins Pressure Reducing Valve With Integral Bypass Check Valve And Strainer
The Wilkins Model 600HLR is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The integral strainer makes this device most suitable for residential and commercial water systems requiring fre
600HLR - Standard model as shown.

Zurn Wilkins 1/2" P1500 Calibrated Pressure Relief Valve
The Zurn Wilkins model P1500 Calibrated Pressure Relief Valve is designed for installation on cold water service lines as a means of protection against excessive pressure buildup. These devices are for pressure only and should be used in conjuncti
W12-P1500 - 1/2" model with adjustable spring range of 175-1225kpa.
W19-P1500 - 3/4" model with adjustable spring range of 175-1225kpa.