ASI Frameless Stainless Steel Mirror
AS8026 mirrors are fabricated from 1mm Type 304 stainless steel with a #8 mirror finish. The mirror has a 6mm thick Masonite waterproof tempered back board for strength and the stainless steel mirror is returned 8mm all around the backing board. The mirror has 4 x 5.5mm mounting holes ( 6 x holes on 610 x 910 size).
NOTE: The 8026 does not have the same reflective quality as glazed versions such as Model 20650 and some limited distortion is likely in very large sizes.
Delabie Through Wall Timed Flow Dual Basin Control Valve
DELABIE MS-747-2.. is a dual valve vandal resistant through wall water control designed to be installed through wall where there is an accessible duct directly behind the basin. The valve set is supplied with a 80 x 150mm dia. escutcheon plate.
Pressing a valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a pair of coloured indicators allowing it to be used for both CW and MW.
Also available with an extended round headed button to suit use in disabled bathrooms.
Delabie Through Wall Timed Flow Basin Control Valve
A vandal resistant through wall water control which is designed to be installed where there is an accessible duct directly behind the basin.
• The valve set is supplied with a 75mm dia.escutcheon plate.
• Pressing the valve button initiates immediate water flow.
• On release of button water will stop flowing within 3 seconds.
Also available with an extended round headed button to suit accessible bathroom.
Delabie Through Wall Timed Flow Control Valve
A vandal resistant through wall water control, designed to be installed through the backsplash of either the KWC GRP wall mounted basins or KWC stainless steel combi units.
• Pressing valve button initiates immediate water flow.
• On button release, water will continue to flow for 15 seconds.
Also available with an extended round headed button to suit use in accessible bathrooms.
Zurn Spare Parts
Whilst we expect all Zurn valves to give years of trouble free life, there will be a time when maintenance will be required in order to ensure correct flush volumes and correct pan evacuation.
The enclosed Spare Parts sheets will enable the maintenance personnel to recognise the valve installed and choose the necessary spare parts required. The Trouble Shooting Guide will help to determine the cause of the problem.
The most common spare parts are listed under the MODELS tab, you can see the images of these if you scroll through the images on this page.
Zurn Recessed Single Flush Valve
Zurn ZH6152 is a concealed mounted toilet pan flush valve designed to be installed in a plumbing duct with a remote hydraulic push button mounted on the wall directly above the toilet pan. Depending on the model of valve chosen, it may be installed connected to mains pressure water supply or from a non potable supply tank.
Pressing the button delivers a metered 6L flush (adjustable) irrespective of pressure variations.
Zurn Dual Flush Valve
Zurn ZDF6152-XL is a recess mounted toilet flush valve designed to be connected to mains pressure water supply. It is also available as a non potable valve where water is supplied from a dedicated supply tank or from a pressurized recycled water feed. The 2 button plate allows the user the option of flushing 3 or 6L. Flush volumes are consistent irrespective of pressure variations. The product is specified in 2 parts: the inwall valve is common to all versions - ref ZDF6152XL (L). The customer must then chose the type of face plate based on the Tech Data sheet (see Downloads)
WISA 300VP High Security Inwall Cistern
The Wisa WS300VP high security inwall cistern is ideal for use in public places where reliability is important and where mains pressure flush valves are not practical due to insufficient pipe sizing.
The cistern is supplied with a robust stainless steel push button assembly which is screw fixed to the wall, a pneumatic actuator and pneumatic tubing allowing flexibility of button mounting point.
The inwall cistern is supplied as standard in a 6L capacity and is only available as a single full flush. Full duct access must be available to the WS300VP for servicing purposes.
Franke Stainless Steel Pod Urinal
High quality satin finish Type 304 stainless steel urinal, complete with 40mm waste.
FR-CMPX538 is a surface mounted back inlet urinal, suitable for connection to mains pressure flushing valves such as Delabie 779 128, 779 427, and 778 800 recess mounted valves. When installed, the urinals can acheive a WELS rating of 3 Stars. Alternatively, where up to 4 urinals are installed on a common wall, a Zurn Z6190WG flushing valve complete with Water Guard sensor could be used for similtaneous flush and flushing regulation on
user detection.
KWC Franke Stainless Steel Toilet Suite
The KWC Franke FRFM4-300VP is a standard height stainless steel back to wall/ floor mounted toilet suite. It is suitable when vandal resistant products are required.
The cistern tank provided is WISA 300VP, which is surface mounted, behind a robust stainless steel cover.The pneumatic actuator is fitted on this. This is only available in a single 6L flush version.
