KWC Franke Stainless Steel Floor Mounted P or S Trap Toilet Pan
KWC FRANKE FRFM4 is a floor mounted stainless steel P trap toilet pan with side access panels. It is fully shrouded with anti-ligature flushing rim with sufficient room inside the shroud to enable it to be converted to an S Trap if preferred.
The top fascia plate is convexed to prevent pooling of liquid. Seat or seat pads can be supplied but can only be fitted at time of ordering.
For flushing options, please refer to the Zurn flush valves, Warden control system or Wisa inwall cistern.
Warning: Do not use dimensions for set out purposes.
KWC Heavy Duty Stainless Steel Wall Mounted Toilet Pan
KWC HEAVY-DUTY Wall hung WC pan, hidden mounting with stainless steel rods through wall, fixing and service via maintenance room, type 304 stainless steel, surface satin finished, material thickness 1,5 mm, flushing certificated to EN 997, concealed flushing rim with min. 4 liter flushing capacity, with a shrouded 100 mm diameter horizontal 'P' trap outlet, pressed seat area tapered towards centre, all edges curved, fixing with 280 mm stainless steel rods and screw nuts (included) through the wall. 4 litre flush EN 997 approved.
Dimensions 360 x 351 x 500 mm (W x H x D)
KWC Heavy Duty Stainless Steel Floor Mounted Toilet Pan
KWC Heavy-Duty floor standing WC pan for fitting through duct wall, manufactured from type 304 stainless steel, material thickness 1,5 mm for the pan and shroud - satin polish finish. The WC incorporates a stainless steel P trap 102 mm o/d. A separate mounting plate and 4 bolts are provided for mounting the WC through a duct wall. The Campus WC has a pressed seating area that does not require a separate seat in vandal prone installations. However, a seat and lid can be fitted. Approval: Complies with BS EN 997 for 4.5 litre flushing.
Franke Stainless Steel Medium Duty Security Wash Basin
The Franke ANMX452 is a satin finish Type 304 stainless steel basin.
The ANMX452 has a deep bowl with a 32mm waste. Trap is not supplied. Basin is not pre-punched for taps but can be on special request.
The basin is designed to be face wall mounted with a removable shroud allowing access to fixing and waste and water fittings. The shroud is securely fastened to the basin and wall using a concealed Allen screw fixing.
It is suitable for use in vandal prone areas such as public toilets, schools, courthouses, prisons, and police stations.
Franke Stainless Steel Guardian Wash Basin
The Franke HDTX450 is a satin finish Type 304 stainless steel basin. It is of one piece, seamless construction and is suitable for use in vandal prone areas such as public toilets and schools.
• It has a deep bowl with a 32mm waste.
Note: Basin is not pre-punched for taps but can be on special request.
• The basin is designed to be bolted through the wall where a plumbing duct exists.
MacDonald Security Drinking Fountain
MacDonald MS-DF is a vandal resistant wall mounted drinking fountain designed to be installed outside where spilled water can fall to ground.
Pressing the valve button initiates immediate water flow. On release of button water will stop flowing within 3 seconds. Each valve is supplied with a 2L/min flow restrictor to ensure a uniform flow rate.
Wisa Inwall Cistern & Delabie Basin Valve Set
This is an in wall cistern combined with a Delabie timed flow valve. It offers a plumbing option for Franke combi units where flushing and only cold water is required. Ideal for use with limited water supply pipes where flush valves are not an option.
• Supplied with robust stainless steel push button assembly, which is screw fixed to the wall above the combi and basin bubbler.
• Supplied in a 6L capacity and only available as a single full flush.
• Pressing the BASIN button initiates a timed flow of water from the bubbler for 7 seconds.
Franke Stainless Steel Combination Toilet Pan & Wash Basin
Franke back to wall mounted combination stainless steel WC & basins are built for installation in high security areas such as police, prison and high court cells. Supplied as standard with LH toilet roll holder but can be supplied on special indent with RH toilet roll holder or without holder. Fabricated in 1.2 and 1.6mm Type 304 stainless steel with a satin finish, the combis are supplied standard without seats but can be fitted with seat pads, specify as required. All Franke WC’s are designed to flush with 6L of water.
Warden WA5 Cell Fixture Control System
Warden WA5 is primarily a cell water control product, providing limitation of use for showers, WC flushing and basin faucets.
Warden controllers use reliable piezo electric switch technology to activate low voltage solenoid valves and not only limit flow rates to plumbing fixtures but also restrict how often they can be used.
Delabie Tonic-Jet Shower Head
Delabie DE712000 ‘Tonic Jet’ is a recessed scale-resistant fixed shower head with a flow rate 6 lpm at 3 bar, giving it a 5-star WELS rating. The shower head has an automatic flow rate regulation, scale-resistant and ligature-resistant nozzle with adjustable spray, has a chrome-plated solid brass body, fixed with concealed blocking screw, systematically drains after use (no water retention or impurity deposits), and has an inlet connection M½".
Ideal for use in applications requiring a high degree of vandalism protection and water consumption minimisation.
