Wiri Prison, Auckland

MacDonald Industries are continually expanding our range of Security products to meet the risk of vandalism, self harm, and willful damage in bathrooms whilst at the same time offer water conservation, robust and proven reliability, and easy to use products. Working closely alongside this industry allows us to continually improve the range available to best meet the needs in our mental health facilities, prisons, police stations and courthouses to provide safety in all secure facilities.

To find the products that best suit this category of Security, click on the Filter By Product Industry drop box in the navigation menu at the top left of the screen and select the appropriate filter to show our recommended products for the selected category.

MacDonald Security Access Panels

MS-AP heavy duty access panels are designed to give general access to inwall mounted valves plus, more specifically, recess mounted ZURN single flush, flushing valves where a heavier duty panel is preferred over the standard ZA access panel.

Panel fabricated in 2.0mm Type 304 stainless steel with a No 4 brushed finish and radiused edge,
Standard size 345 x 345 but also available as -SP 345 x 450 where greater access is required.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Warden WA4 Plumbing Control System

Warden is a multi purpose electronic control system for ensuring ultimate security and economy of plumbing fixtures.  This coupled with our plumbing fixtures gives you a complete solution to every high security application (see stainless steel sanitaryware for fixtures).

Warden WA4 uses piezo electric switches to activate low voltage industry standard solenoid valves on plumbing fixtures.  Warden WA4 is mostly used for multi shower applications where the client is looking to provide limitations on shower run times, with lock out periods after use, such as;

Product Enquiry
To prevent automated spam submissions leave this field empty.

MacDonald Universal Trap

The MacDonald Universal Trap is designed for urinals with a rear or downward outlet with volumes of between 2 - 4 L/min flow. The trap has a Ø50mm inlet that connects to the fixture outelt and a Ø50mm outlet that connects to a 50mm waste pipe socket. Comes with a plug for easy cleaning. This trap can also be used for wash basins where an inwall solution is required.

Product Enquiry
To prevent automated spam submissions leave this field empty.

KWC DVS High Security Basin

KWC DVS DV-VR01-081 is a high security washbasin designed and tested to be vandal-proof and avoid ligature points wherever possible. This model a no tap hole variant and is suited to combine with a MacDonald Security washbasin control set available in electronic or mechanical.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Watts Eurotherm Thermostatic Mixing Valve

Watts Eurotherm TRL117 is a thermostatic mixing valve designed to supply sinks and washbasins with tempered water not exceeding the set temperature (up to 5 washbasins depending on tap flow rate). This mixer is ideal for schools, restaurants, laboratories,, offices, correctional, etc...anywhere needing a supply of water at a pre-set temperature on site. Hot water supply cut totally and immediately is cold water supply is interupted.

PROTECTION AGAINST LEGIONELLA

Product Enquiry
To prevent automated spam submissions leave this field empty.

KWC DVS High Security Shower Head

The DV-SH07-040 is a wall mounted 30˚ angled high security shower head with 4 rings. Substantially reduced ligature risk with a tamper proof security locking plate. This shower head is intended for installations where everything except the showerhead and control are concealed behind a wall or panel.

Brushed 316 stainless steel, with invisible anti-rotating pin. Inlet connection M1/2” BSP thread.

This shower head can be used in conjunction with any of MacDonald shower controllers including Warden electronic, MacDonald Security, or Delabie time delay products.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Solo Electronic Dual Flush Valve

MacDonald SOLO-DFXL is a recess mounted dual flush mains pressure flush valve designed to connect to WC pans that are 6/3L capable. This will enable a 3 Star WELS rating for the WC. SOLO-DFXL is a plumber only installed, low voltage electronic controller capable of fitting within a minimum 94mm wall cavity. The valve is supplied with a 450 x 325 access panel to which 2 x touch sensitive piezo switches are mounted. Concealed fixing for the panel allows for a secure and unobtrusive cover plate.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Zurn Inline Vacuum Breaker

The Zurn Z7000-VB inline vacuum breaker is designed for use in the shower where a shower hose is fitted to prevent the backflow of water. Inlet and outlet are 1/2". The female connection attaches to the water supply fixed wall elbow and the shower hose connects to the male outlet. Arrow on vacuum breaker should point in the direction of the water flow. The body is manufactured in brass with hard chrome finish.

Product Enquiry
To prevent automated spam submissions leave this field empty.

ASI Recessed Soap Holder

ASI Recessed Soap Dish manufactured from 16 gauge type 304 stainless steel with satin finish. One piece drawn construction with beveled trim and embossments for air circulation and drainage. Unit has two “T” nuts welded on back for rear mounting.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Zurn Toilet Flush Valve and Basin Valve Set to suit Franke Combi

ZH-6152XL-PO is a combination mains pressure flushing valve and Delabie timed flow basin valve set, specifically designed to mount through the backsplash of a Franke combi unit providing a vandal resistant means of WC flushing and cold water supply to the basin. The flush valve is pre-set to deliver a 6L flush and has achieved the distinction of Australian Standards Watermark approval and WELS 1 Star rating. Valve upgradable to 4.5L flushing should regulations permit.

Pipework design is critical to correct valve operation and must be completed by a suitably qualified person.

Product Enquiry
To prevent automated spam submissions leave this field empty.

Pages